Product Description

Boasting an appealing Knotty Pine wood grain pattern, this timeless door design features six raised shaped panels.

Features & Benefits

Unfinished ready to be personalised
Solid Engineered core for added strength and durability
Classic design for traditional homes
This internal door can be trimmed, giving flexibility when installing
Full product suite available from LPD Doors
10 years manufacturer's conditional warranty
For internal use

Technical Information

	1981 x 610mm / 24" x 35	1981 x 686mm / 27" x 35	1981 x 711mm / 28" x 35	1981 x 762mm / 30" x 35	2032 x 813mm / 32" x 35	1981 x 838mm / 33" x 35
Code	PIN6P24	PIN6P27	PIN6P28	PIN6P30	PIN6P32	PIN6P33
Product	6P	6P	6P	6P	6P	6P
Height	1981mm	1981mm	1981mm	1981mm	2032mm	1981mm
Width	610mm / 24"	686mm / 27"	711mm / 28"	762mm / 30"	813mm / 32"	838mm / 33"
Thickness	35 mm	35 mm	35 mm	35 mm	35 mm	35 mm
Weight	19 kg	20 kg	21 kg	22 kg	24 kg	25 kg
Finish Type	Unfinished	Unfinished	Unfinished	Unfinished	Unfinished	Unfinished
Core Type	Solid Engineered	Solid Engineered	Solid Engineered	Solid Engineered	Solid Engineered	Solid Engineered
Trimming Short Edge	8mm	8mm	8mm	8mm	8mm	8mm
Trimming Long Edge	8mm	8mm	8mm	8mm	8mm	8mm

FAQs

Where can I buy LPD products?

Our products can be purchased through our many Builders Merchants, Independent Door Specialists and Online Retailers across the UK. You can use our stockist finder here to locate a distributor which best suits your needs.

What treatment should I use on my internal door?

Treatment can vary depending on the material used for the face of the door. For our unfinished wood veneer doors, we offer a selection of Clear Hardwax oils in varying levels of sheen, depending on your preference. We do not recommend the use of certain oils such as Danish Oil, Teak Oil, Yacht Varnish, Linseed Oil or similar on any of our internal doors. If you trim the edge of your pre-finished oak doors, you will need to treat them with the same Hardwax oil.

Can you trim LPD Doors down?

The doors’ trimming allowance can differ across our range. Please check the trimming allowance of the door you’re interested in, which can be found under the ‘Technical Information’, on each specific product page.