10mm (w) x 7mm (h) square cut grooves Pre-finished oak finish Solid Engineered core

Product Description

Coming in Pre-finished Oak, this internal door is ready to hang. The Melbourne is an unusual and modern design, perfect for large spaces. Featuring deep square cut, vertical grooves across the door, the texture and look will really stand out in your home.

Features & Benefits

Fully finished ready to be installed
Solid Engineered core for added strength and durability
Modern, attractive design
This internal door can be trimmed, giving flexibility when installing
This internal door can be trimmed, giving flexibility when installing
Glazed versions of this internal door also available
10 years manufacturer's conditional warranty
Square cut grooves give the vertical panelled design Square cut grooves give the vertical panelled design Square cut grooves give the vertical panelled design
For internal use

Technical Information

	1981 x 610mm / 24" x 35	1981 x 686mm / 27" x 35	1981 x 762mm / 30" x 35	1981 x 838mm / 33" x 35	2040 x 626mm x 40	2040 x 726mm x 40	2040 x 826mm x 40
Code	PFOMEL24	PFOMEL27	PFOMEL30	PFOMEL33	PFOMEL626	PFOMEL726	PFOMEL826
Product	Melbourne	Melbourne	Melbourne	Melbourne	Melbourne	Melbourne	Melbourne
Height	1981mm	1981mm	1981mm	1981mm	2040mm	2040mm	2040mm
Width	610mm / 24"	686mm / 27"	762mm / 30"	838mm / 33"	626mm	726mm	826mm
Thickness	35 mm	35 mm	35 mm	35 mm	40 mm	40 mm	40 mm
Weight	30 kg	30 kg	33 kg	33 kg	33 kg	33 kg	33 kg
Finish Type	Pre-Finished	Pre-Finished	Pre-Finished	Pre-Finished	Pre-Finished	Pre-Finished	Pre-Finished
Core Type	Solid Engineered	Solid Engineered	Solid Engineered	Solid Engineered	Solid Engineered	Solid Engineered	Solid Engineered
Lipping Long Edge	20mm	20mm	20mm	20mm	20mm	20mm	20mm
Trimming Short Edge	8mm	8mm	8mm	8mm	8mm	8mm	8mm
Trimming Long Edge	8mm	8mm	8mm	8mm	8mm	8mm	8mm

FAQs

Where can I buy LPD products?

Our products can be purchased through our many Builders Merchants, Independent Door Specialists and Online Retailers across the UK. You can use our stockist finder here to locate a distributor which best suits your needs.

What treatment should I use on my internal door?

Treatment can vary depending on the material used for the face of the door. For our unfinished wood veneer doors, we offer a selection of Clear Hardwax oils in varying levels of sheen, depending on your preference. We do not recommend the use of certain oils such as Danish Oil, Teak Oil, Yacht Varnish, Linseed Oil or similar on any of our internal doors. If you trim the edge of your pre-finished oak doors, you will need to treat them with the same Hardwax oil.

Can you trim LPD Doors down?

The doors’ trimming allowance can differ across our range. Please check the trimming allowance of the door you’re interested in, which can be found under the ‘Technical Information’, on each specific product page.