Product Description

A unique take on the classic Mexicano design. A modern glazed panel featuring clear glazing with frosted lines replicating the solid panel below which follows the traditional Mexicano. This door is perfect for allowing natural light to flow through your home whilst preserving your privacy.

Features & Benefits

Unfinished ready to be personalised
Solid Engineered core for added strength and durability
Modern, attractive design
This internal door can be trimmed, giving flexibility when installing
Manufactured using environmentally friendly timber Manufactured using environmentally friendly timber Manufactured using environmentally friendly timber Manufactured using environmentally friendly timber
Full product suite available from LPD Doors
10 years manufacturer's conditional warranty
10 years manufacturer's conditional warranty 10 years manufacturer's conditional warranty Square cut grooves give the vertical panelled design
Clear glazing allows natural light to flood any room

Technical Information

	1981 x 686mm / 27" x 35	1981 x 762mm / 30" x 35	1981 x 838mm / 33" x 35	1981 x 762mm / 30" x 44	1981 x 838mm / 33" x 44
Code	OMEX1L27	OMEX1L30	OMEX1L33	OMEX1LFC30	OMEX1LFC33
Product	Mexicano Half Light	Mexicano Half Light	Mexicano Half Light	Mexicano Half Light	Mexicano Half Light
Height	1981mm	1981mm	1981mm	1981mm	1981mm
Width	686mm / 27"	762mm / 30"	838mm / 33"	762mm / 30"	838mm / 33"
Thickness	35 mm	35 mm	35 mm	44 mm	44 mm
Weight	24 kg	27 kg	30 kg	36 kg	38 kg
Finish Type	Unfinished	Unfinished	Unfinished	Unfinished	Unfinished
Core Type	Solid Engineered	Solid Engineered	Solid Engineered	Solid Engineered	Solid Engineered
Lipping Long Edge	20mm	20mm	20mm	11mm	11mm
Trimming Short Edge	8mm	8mm	8mm	9mm	9mm
Trimming Long Edge	8mm	8mm	8mm	9mm	9mm
Fire Rating	N/A	N/A	N/A	30 Minutes	30 Minutes

FAQs

Where can I buy LPD products?

Our products can be purchased through our many Builders Merchants, Independent Door Specialists and Online Retailers across the UK. You can use our stockist finder here to locate a distributor which best suits your needs.

What treatment should I use on my internal door?

Treatment can vary depending on the material used for the face of the door. For our unfinished wood veneer doors, we offer a selection of Clear Hardwax oils in varying levels of sheen, depending on your preference. We do not recommend the use of certain oils such as Danish Oil, Teak Oil, Yacht Varnish, Linseed Oil or similar on any of our internal doors. If you trim the edge of your pre-finished oak doors, you will need to treat them with the same Hardwax oil.

Can you trim LPD Doors down?

The doors’ trimming allowance can differ across our range. Please check the trimming allowance of the door you’re interested in, which can be found under the ‘Technical Information’, on each specific product page.