Product Description

Two frosted glazed panels feature clear lines and a curved top edge, with two raised shaped panels in a white composite below.

Features & Benefits

Primed, ready for a final top coat
Hollow core doors offer lightweight construction, ideal for affordability and ease of installation
Classic design for traditional homes
This internal door can be trimmed, giving flexibility when installing
Manufactured using environmentally friendly timber
Full product suite available from LPD Doors
10 years manufacturer's conditional warranty
Frosted glazing allows light to pass through whilst still preserving some privacy
For internal use

Technical Information

	1981 x 686mm / 27" x 35	1981 x 762mm / 30" x 35	1981 x 838mm / 33" x 35
Code	MAY2P2L27	MAY2P2L30	MAY2P2L33
Product	Mayfair 2L	Mayfair 2L	Mayfair 2L
Height	1981mm	1981mm	1981mm
Width	686mm / 27"	762mm / 30"	838mm / 33"
Thickness	35 mm	35 mm	35 mm
Weight	16 kg	18 kg	18 kg
Finish Type	Primed	Primed	Primed
Core Type	Hollow	Hollow	Hollow
Lipping Long Edge	20mm	20mm	20mm
Trimming Short Edge	8mm	8mm	8mm
Trimming Long Edge	8mm	8mm	8mm

FAQs

Where can I buy LPD products?

Our products can be purchased through our many Builders Merchants, Independent Door Specialists and Online Retailers across the UK. You can use our stockist finder here to locate a distributor which best suits your needs.

Can you trim LPD Doors down?

The doors’ trimming allowance can differ across our range. Please check the trimming allowance of the door you’re interested in, which can be found under the ‘Technical Information’, on each specific product page.

What treatment should I use on my internal door?

Treatment can vary depending on the material used for the face of the door. For our unfinished wood veneer doors, we offer a selection of Clear Hardwax oils in varying levels of sheen, depending on your preference. We do not recommend the use of certain oils such as Danish Oil, Teak Oil, Yacht Varnish, Linseed Oil or similar on any of our internal doors. If you trim the edge of your pre-finished oak doors, you will need to treat them with the same Hardwax oil.